box saiprasitAssoc. Prof. Dr. Saiprasit Koetniyom

PUBLICATION

1   Koetniyom, S., Brooks, P. C. and Barton, D. C., ”Finite Element Prediction of Inelastic Strain Accumulation in Cast-iron Brake Rotors”, Brakes 2000: Automotive Braking-Technologies for the 21st Century Edited by Barton, D. and Earle S., Professional Engineering Publishing Limited Bury St Edmunds and London, UK, 2000
2   Koetniyom, S., Brooks, P. C. and Barton, D. C., “Thermal Stress Analysis of Cast Iron Brake Discs”IMechE Proceedings, UK, 2001
3   Koetniyom, S., Brooks, P. C. and Barton, D. C., “Monotonic and Cyclic Stress Strain Curves with Temperature Dependence for Cast Iron Brake Disc”, CSME Forum 2002, Queen’s University, Kington Ontario, Canada, 2002
4   Koetniyom, S., Brooks, P. C. and Barton, D. C., “The development of a material model for cast iron that can be used for brake system analysis”, Proc. Instn. Mech. Engrs. Vol 216 Part D: Journal of Automotive Engineering D06101, 2002
5   Saiprasit Koetniyom, “Finite Element Analysis of Temperature Brake Disc under Various Material Selection”, Motor Vehicles Towards Globalization”,The 12th International Pacific Conference on Automotive Engineering, IPC-12, April 1st-4th, 2003, Bangkok, Thailand
6   Saiprasit Koetniyom, “Temperature responses of mountain-bike brake discs”, International Congress on Sports Dynamics ICSD 2003, 1-3 September 2003, Melbourne, Australia
7   Saiprasit Koetniyom and Direk Choowichien “Handling Investigation of Double Deck Bus with Three Wheel Axles in Thailand, 8th International Conference on Engineering Systems Design and Analysis, ESDA 2006, 4-7th July, 2006, Torino, ITALY
8   Supachai Lakkam and Saiprasit Koetniyom, “Investigation of Brake Noise Parameters Using Single Dynamometer”, The 5thInternational Conference on Automotive Engineering (ICAE-5) March 30 – April 3, 2009, BITEC, Bangkok, Thailand
9   Porntep Kaewpitakkhun, Saiprasit Koetniyom and Banpot Horbanluekit, “Analysis and Design of the Road Safety Barrier by Numerical Method”, The 5th International Conference on Automotive Engineering (ICAE-5) March 30 – April 3, 2009, BITEC, Bangkok, Thailand
10 Sung Bin Han, Yong Hoon Chang, Gyeung Ho Choi, Yon Jong Chung, Chedthawut Poompipatpong and Saiprasit Koetniyom, “Effect of the Intake Valve Timing and the Injection Timing for a Miller Cycle Engine”, Journal of Energy Engineering, Vol. 19, No. 1 pp. 32-38 , 2010
11 Thanapon Chotika, Jan-WelmBiermann and Saiprasit Koetniyom, “Energy Absorption Analysis of Various Vehicles under Crash Test Simulation”, The Second TSME International Conference on Mechanical Engineering, Krabi, Thailand, 19-21 October, 2011
12 Supachai Lakkam and Saiprasit Koetniyom, “Optimization of constrained layer damping for strain energy minimization of vibrating pads”, Songklanakarin Journal of Science and Technology, Volumn 34, 2012
13 Suprom Uttasena, Saiprasit Koetniyom and Thira Jearsiripongkul, “Transient Response Analysis of High Pressure Regulator Solenoid using PID Current Controller”, The 4th KKU International Engineering Conference 2012 (KKU-IENC 2012), “Driving together towards ASEAN Economic Community”, Faculty of Engineering, KhonKaen University, Thailand, May 10-12,2012
14 Jirapat Jirawattanasomkul and Saiprasit Koetniyom, “Design and Development of Road Load Conditions for Chassis Dynamometer”, International Conference on Production, Materials and Automobile Engineering (ICPMAE'2012), Pattaya, Thailand, July 28-29, 2012
15 Arisara Chaikittiratana, Saiprasit Koetniyom, and Supachai Lakkam, “Static/kinetic friction behaviour of a clutch facing material: Effects of temperature and pressure”, ICAMAME 2012 : International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, Zurich, Switzerland July 5-6, 2012, and Publication in World academy of science, Engineering and Technology 66, 2012
16 Itsara Rojana, Saiprasit Koetniyom, “Accidental Damage analysis of bus body structures in Thailand”, The 26th Conference of the Mechanical Engineering Network of Thailand,October2012, ChiangRai, Thailand
17 Thanitkit Waruttamaphanitchakul, Saiprasit Koetniyom and Thira Jearsiripongkul, “Development of Stiffness and Structural Damping Measurements for Rubber Engine Mount”, The 3rd TSME International Conference on Mechanical Engineering, October 2012, ChiangRai, Thailand
18 Supachai Lakkam, Kullayot Suwantaroj, Phupoom Puangcharoenchai, Songwut Mongkonlerdmanee and Saiprasit Koetniyom, “Study of heat transfer on front- and back-vented brake discs”, Songklanakarin Journal of Science and Technology, Volumn 35 (6), 671-681, Nov.-Dec. 2013
19 Saiprasit Koetniyom and Kanit Chaloeyjanya, “Potential evaluation of rolling stock manufacturing in Thailand”, KKU ENGINEERING JOURNAL April –June 2014;41(2):147-154
20 I Putu Alit Putra, Julaluk Carmai, Saiprasit Koetniyom, Bernd Markert “The Effects of Active Muscle Contraction into Pedestrian Kinematics and Injury during Vehicle-Pedestrian Collision” , 10th European LS-DYNA Conference 2015, Würzburg, Germany
21 Supachai Lakkam and Saiprasit Koetniyom, “Investigation of accident scenarios between pedestrians and city buses in Thailand”, International Journal of Automotive and Mechanical Engineering (IJAME), ISSN: 2229-8649, Volumn 12, pp 3076-3088 July-December 2015
22 Saiprasit Koetniyom, Krittapat Makarabhirom, and Julaluk Carmai, “Risk of rear occupant injuries under seat configuration in extended cab pickup truck: Actual left offset-frontal collision in Thailand (Accepted on 5 April 2017),” Songklanakarin Journal of Science and Technology, Publish on Aug. 2018.
23 Saiprasit Koetniyom, Krittapat Makarabhirom, and Julaluk Carmai, "Risk of rear occupant injuries under seat configuration in extended cab pickup truck: Actual left offset-frontal collision in Thailand (Accepted on 5 April 2017)," Songklanakarin Journal of Science and Technology, 40 (3), 588-594, May - Jun. 2018
24 Saiprasit Koetniyom, Manus Dangchat, Songwut Mongkonlerdmanee, Julaluk Carmai and Sunarin Chanta, "Identification of handbrake patterns of young motorcycle riders in Thailand using a newly invented force measuring device", Engineering Journal, Engineering Journal, 2018, 22.5: 185-197.
25 Pongsakorn Karnjanapollert, Saiprasit Koetniyom and Julaluk Carmai, "The use of multibody dynamics simulations to investigate motorcyclist kinematics and injuries in accidents", The 14th International Conference on Automotive Engineering, Thailand, April 2-3, 2018
26 Saiprasit Koetniyom, Julaluk Carmai, Khairil Anwar Ahmad Kassim, Yahaya Ahmad, "Kinematics and Injury Analysis of Front and Rear Child Pillion Passenger in Motorcycle Crash", International Journal of Automotive and Mechanical Engineering (IJAME), Vol 15 No 3, 2018: July-September [ISSN: 2229-8649 (Print); 2180-1606 (Online)]
27 Yahaya Ahmad, Wira Jazair Yahya, Khairil Anwar Abu Kassim, Saiprasit Koetniyom, Julaluk Carmai, and Hasannuddin abd Kadir. 2019. “Driver Head Kinematic Analysis under Frontal Offset Collision during the Rebound Phase AU - Ahmad, Yahaya.” International Journal of Crashworthiness, January, 1–9. doi:10.1080/13588265.2018.1497128